
CNC Fabrication
CNC Fabrication 422017 4-Line Feed Valley Mount Fuel Line Kit - Black
Part # CNC422017$399.95
Fitment not selectedAdd your truck to verify compatibility
Open Garage →Fast fulfillmentLive inventory and order status
Secure checkoutProtected by Shopify
Diesel supportReal help for the right part
Product details
Description
The CNC Fabrication 422017 4-Line Feed Valley Mount Fuel Line Kit - Black allows you to build a custom pump setup in your Ford 7.3L Powerstroke. CNC Fab recommends using the stock Super Duty Bosch pump for stock to 160/30 injectors. For higher horsepower setups, a 00LPH pump for trucks above 160/30 to 250/100 injectors and an adjustable pressure regulator.
For a plug-n-play type fuel pump/filter setup, CNC Fab recommends the AirDog II 5G Fuel Pump as it has filters and a regulator built in. This pump offers straightforward installation, as a lot of the legwork for finding fittings/adapters comes with the AirDog kit.
For a plug-n-play type fuel pump/filter setup, CNC Fab recommends the AirDog II 5G Fuel Pump as it has filters and a regulator built in. This pump offers straightforward installation, as a lot of the legwork for finding fittings/adapters comes with the AirDog kit.
Features
- High Quality Billet T-6061 Aluminum
- Test Port To Measure/Set Fuel Pressure
- Pump, Regulator, & Filters Will Need To Be Purchased
- Every Single Kit Is Test Fit During Production To Ensure Perfect Fitment
- Meant For Installation With Factory Or Aftermarket Drop-In Style Turbos
- Upgraded With Aerospace/Military Grade High Flow Compression Fittings
- 1/2" AN (-08) Inlet For Plenty Of Volume Of Fuel For Unlimited Size Injectors
- All Lines Are Made Of 304 Sandvik Coromat Seamless Stainless Steel Tubing
- Eliminates Many Leak Points With The Stock Factory Fuel Pump & Fuel Bowl
- Base Plate & Distribution Manifold Are Pre-Assembled For Easier Installation
- Comes With Necessary Fittings, O-Rings For Turbo Pedestal, & Bolts, For A Complete Install
- Lines Are Mandrel Bent In Our Shop On Our State Of The Art 3 Axis CNC Tubing Bender For A Perfect Fit Every Time
Note
Pump, regulator, and filters will need to be purchased separately.
CNC Fabrication recommends using Loctite 545 on the pipe threaded fittings during installation, or a gas (NG or propane) rated Teflon base paste.
It is critical that you do not get any tape into the fuel system during installation. If you are very careful, you can use Teflon tape as long as it is also rated for gas.
Pump, regulator, and filters will need to be purchased separately.
CNC Fabrication recommends using Loctite 545 on the pipe threaded fittings during installation, or a gas (NG or propane) rated Teflon base paste.
It is critical that you do not get any tape into the fuel system during installation. If you are very careful, you can use Teflon tape as long as it is also rated for gas.
Complete the job
Build the job. Not just the cart.
Start with the right part, then choose the supporting pieces that help prevent a second teardown or a last-minute parts run.
Choose your supporting parts
Build an install-ready package.
✓

Primary part · includedCNC Fabrication 422017 4-Line Feed Valley Mount Fuel Line Kit - BlackCNC Fabrication
$399.95