
Fleece Performance
Fleece PowerFlo In-Tank Fuel Lift Pump FPE-PF-CUMM-9197
Part # FPE-PF-CUMM-9197$889.00
Fitment not selectedAdd your truck to verify compatibility
Open Garage →Fast fulfillmentLive inventory and order status
Secure checkoutProtected by Shopify
Diesel supportReal help for the right part
Product details
Description
has the Fleece FPE-PF-CUMM-9197 PowerFlo Lift Pump an entire fuel supply upgrade kit for your 1991-1997 Dodge Ram 5.9L D250/D350 & 2500/3500 Diesel. The PowerFlo Lift Pump is a factory replacement performance lift pump from the diesel experts at Fleece Performance. Featuring a new sending unit and float, this lift pump will get your fuel gauge working properly again. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 HP!
Direct OEM In-Tank Fitment
The PowerFlo Lift Pump does not require any drilling, cutting, or sumps to cut into your fuel tank and installs in less time than other high-flow lift pumps.
Dual Gerotor
Since two is always better than one, the PowerFlo contains two OEM quality gerotor pumps, increasing flow capacity and reliability over the stock pump.
Seamless Integration
The active fill bucket removes the need for tank sumps, draw straws, and the 1/4 tank issues that are typically when seeking a higher flow aftermarket lift pump to meet your engine's needs.
Direct OEM In-Tank Fitment
The PowerFlo Lift Pump does not require any drilling, cutting, or sumps to cut into your fuel tank and installs in less time than other high-flow lift pumps.
Dual Gerotor
Since two is always better than one, the PowerFlo contains two OEM quality gerotor pumps, increasing flow capacity and reliability over the stock pump.
Seamless Integration
The active fill bucket removes the need for tank sumps, draw straws, and the 1/4 tank issues that are typically when seeking a higher flow aftermarket lift pump to meet your engine's needs.
Features
- Flange Tank Seal
- Wiring Harness & Fuse Taps
- PowerFlo Lift Pump With Integral Fuel Sender
- 16' Of Push Lock Hose & All Necessary -AN Fittings
- Mechanical Fuel Pump Block Off Plate (FPE-CUMM-FBOP)
Application Note
PowerFlo lift pumps are validated for usage with up to 20% biodiesel.
IMPORTANT - Verify your existing MOPAR sending unit part number is listed in the table below. If your part number is not shown, then it is not verified to fit. Many trucks have been retrofitted over time to gasoline model tanks and the SureFlo will not fit into a retrofitted tank configuration. For Model Year 1998 trucks equipped with a 12 valve engine - your vehicle will require Fleece's 1998 12-valve specific kit (Part Number FPE-PF-CUMM-98-12V). These trucks would have been originally equipped with sending unit part number 52102079AB.
You can also verify your proper part number by the resistance range of the level sender on your existing unit.
If your stock sending unit ranges between 6 – 113 ohms – use FPE-PF-CUMM-9198
If your stock sending unit ranges between 20 - 220 ohms – use FPE-PF-CUMM-98-12V
LOW FUEL LEVEL LAMP - This sending unit does NOT include provisions to illuminate the Low Fuel level dash lamp.
IMPORTANT - Verify your OE MOPAR part number in the cross-reference chart
PowerFlo lift pumps are validated for usage with up to 20% biodiesel.
IMPORTANT - Verify your existing MOPAR sending unit part number is listed in the table below. If your part number is not shown, then it is not verified to fit. Many trucks have been retrofitted over time to gasoline model tanks and the SureFlo will not fit into a retrofitted tank configuration. For Model Year 1998 trucks equipped with a 12 valve engine - your vehicle will require Fleece's 1998 12-valve specific kit (Part Number FPE-PF-CUMM-98-12V). These trucks would have been originally equipped with sending unit part number 52102079AB.
You can also verify your proper part number by the resistance range of the level sender on your existing unit.
If your stock sending unit ranges between 6 – 113 ohms – use FPE-PF-CUMM-9198
If your stock sending unit ranges between 20 - 220 ohms – use FPE-PF-CUMM-98-12V
LOW FUEL LEVEL LAMP - This sending unit does NOT include provisions to illuminate the Low Fuel level dash lamp.
IMPORTANT - Verify your OE MOPAR part number in the cross-reference chart
|
Model Year |
Replaces MOPAR P/N |
Previously Superseded P/N's |
Fuel Tank Size |
|
1991 |
52018309 |
52004838, 52004937 |
30 Gallon |
|
1992 |
52018309 |
52004838, 52004937 |
30 Gallon |
|
1993 |
52018309 |
52004838, 52004937 |
30 Gallon |
|
1994 |
4864735 |
R4864735, 4864735 |
35 Gallon |
|
1995 |
4864209 |
04798293, 52102024, 52127802, R4864209, 4864209 |
35 Gallon |
|
1996 |
4798671 |
04798293, 52102024, 52127802, R4864209, 4864209 |
35 Gallon |
|
1997 |
4798671 |
04798293, 52102024, 52127802, R4864209, 4864209 |
35 Gallon |
USE ON 1989/1990 MODEL YEAR TRUCKS
This sending unit will work on MY 1989 and 1990 trucks that have a tank swap to a 1991-1997 newer tank.
Complete the job
Build the job. Not just the cart.
Start with the right part, then choose the supporting pieces that help prevent a second teardown or a last-minute parts run.
Choose your supporting parts
Build an install-ready package.
✓

Primary part · includedFleece PowerFlo In-Tank Fuel Lift Pump FPE-PF-CUMM-9197Fleece Performance
$889.00